PHOSPAT® is a filter cartridge filled with a granulate – made from Phostake – that binds phosphate extremely quickly and reliably. This allows phosphate-contaminated water in swimming ponds, natural pools, lakes, fish and koi ponds, aquariums, fountains, and fish farming systems to be treated in an environmentally friendly way – without the use of chemicals. Perfect for crystal-clear swimming and ideal living conditions for your fish.

HÜRNER Schweisstechnik is your knowledgeable partner for all fields of plastic jointing technologies. Be it small or large sizes, be it jointing with heater coil fittings for electrofusion, butt welding, or retrofits of existing systems with a data logger, be it tools or accessories for pipe preparation, be it database management or technical software to keep being ahead of pipe grid administration—HÜRNER is where the state of the art is in every respect, and frequently is also a little ahead of what you desired in the first place. Other areas in which you can count on us include self-monitored air extraction systems for chemical storage and engineering plastics tailored to the requirements of various industries.

Independent, Quiet, and Sustainable – The New Battery for Mobile Energy Applications Our innovative high-performance battery redefines mobile energy supply. It enables the reliable operation of machines and equipment without fossil fuels, without noise, and without emissions – wherever loud and polluting generators were previously required. The battery delivers stable and powerful energy for demanding applications – such as plastic welding, on construction sites, in workshops, or during outdoor operations, where electricity previously had to be provided by combustion engines. Key Advantages Independent from fossil fuels – full energy supply with zero CO₂ emissions Silent operation – ideal for noise-sensitive environments Sustainable and emission-free – for a cleaner future High energy density – suitable for power-intensive applications such as plastic welding Efficient, quiet, and environmentally friendly – the future of mobile energy supply

PE Chambers – Everything from a Single Source and in Premium Quality With a high level of automation, PE chambers are custom-built and equipped with the corresponding pumps. These complete units are delivered ready for installation and only need to be positioned and connected on site. Häny Plastic and Construction Technology offers: PE pump chambers Chamber-in-chamber systems Sludge collectors Sludge traps friwa® separator chambers Retention chambers Valve chambers Cable loop chambers Access / inspection chambers Special constructions Benefits for Häny customers: 10-year watertightness guarantee Tailor-made production Easy and clean handling More economical than concrete products

Quality 304 refers to a very corrosion-resistant stainless steel quality, which can be used ideally and inexpensively for (almost) all applications with the exception of drinking water use (in Switzerland).

Primus Line® Overland Piping is an environmentally-orientated solution, spoolable and reusable for multiple deployments. It is also extremely quick to install. It has been specially developed for above-ground piping of demanding and potentially hazardous media. Up to 6 kilometres / 3.7 miles of pipe can be laid per day. The installation length of 1,000 metres and more in one piece reduces the number of weak points. Primus Line® Overland Piping naturally conforms to surface irregularities. It can be installed through bushland, nature parks or waterways without damaging the environment. The flexible pipe is available in nominal diameters from DN 150 to DN 350 / from 6 inches to 14 inches. Depending on the diameter, the maximum operating pressure ranges between 56 bar to 20 bar / 812 psi to 290 psi

Primus Line® Rehab is an innovative technology for the trenchless rehabilitation of pressure pipelines for different media such as water, gas and oil. The ideal flow characteristics resulting from an extremely smooth inner coating and optimised systems for high-, medium- and low-pressure requirements make Primus Line® Rehab an economical solution for the rehabilitation of ageing pipelines. In this way, network operators benefit from reliable operation and a sustainable investment in their assets. With installation lengths of up to 2,500 metres / 8,200 feet, a bendability of up to 90 degrees, a low machine requirements and installation speeds of up to 10 metres / 33 feet per minute, Primus Line® Rehab makes the rehabilitation of ageing pipes simple and fast. This makes the system particularly suitable for environments with high geographical, economic, architectural or ecological requirements. The flexible rehab pipe is available in nominal diameters from DN 150 to DN 500 / from 6 inches to 20 inches. Depending on the diameter, the maximum operating pressure ranges between 82 bar and 12 bar / 1189 psi and 174 psi.

We provide comprehensive solutions for your processes, focusing strongly on manual and actuated valve, and measurement solutions such as flow, pH/ORP, conductivity, temperature, pressure, level, dissolved oxygen (DO), free chlorine as well as monitors, transmitters and controllers for the safe management of your liquid processes.

PROGEF Standard products offer high-stress crack resistance as well as pressure, abrasion, corrosion and temperature resistance up to 80°C. The durable properties of the polypropylene system ensure great economic benefits. The uniform material structure also provides optimum weldability and heat distortion resistance.

With its excellent chemical and corrosion resistance, the PVC-U System offers numerous fields of application. The system is widely used in the chemical and textile industries, water and drinking water treatment and vacuum lines.

Das Reinigungsmodul MZ20 zusammen mit einem Steuerungsmodul ME24 ist voll kompatibel zum System Typ 8905. Das Reinigungssystem reinigt die Fluidik sowie die Sensorenoberfläche in den angeschlossenen Sensor Cubes mit maximal zwei Reinigungsflüssigkeiten. Die Reinigung läuft vollautomatisch ab. Wird eine Reinigung angefordert, z. B. durch einen Timer im Steuerungsmodul, werden die nötigen Schritte vom Reinigungssystem durchgeführt. Messwasser Stop -> Reinigungsflüssigkeit dosieren -> Einwirkzeit abwarten -> Spülen -> ggf. zweite Reinigungsflüssigkeit dosieren -> u.s.w. Dabei sind alle Zeiten und Kriterien vom Benutzer einstellbar und können dadurch für jeden Einsatzfall optimal eingestellt werden. Die Reinigungsparameter können entweder über das 7" Touch Display am Online Analyse System oder über den Bürkert Communicator eingestellt werden. Durch den Einsatz des Reinigungssystems werden die manuellen Reinigungen für die Sensoren reduziert und die Langzeitstabilität der Messungen verbessert. Das Reinigungssystem selbst arbeitet wartungsfrei - Ausnahme: Austausch leerer Behälter durch frische Reinigungslösungen.